P10mm Outdoor LED Display
10mm pixel pitch, 10000 pixels per square meter, 32×16 pixels module resolution, 320×160mm module size; available cabinet size: 640×640mm, 960×960mm die-casting cabinet or other customized size aluminum or iron cabinet;
10mm LED Display have 2 basic versions: fixed installation high brightness version with 1/2 scanning method, and mobile rental medium brightness version with 1/4 scanning method
10mm LED Display is big pixel pitch outdoor HD LED display models with unequalled high brightness, high gray grade, high fresh frequency, high contrast ratio, high waterproof and dustproof grade-IP65;
More and more customer like smaller and smaller pixel pitch LED display, so 10mm pixel pitch LED display were taking place by 8mm, 6mm, 5mm, 4mm, 3mm pixel pitch LED display rapidly now. Only some large size fixed installation use LED display still use 10mm pixel pitch LED display.
Pixel Pitch(Unit:mm) | 10 | 10 | 10 | 10 |
Pixel configuration/LED lamp's encapsulation type | 3535 | 3535 | 3535 | 3535 |
Scanning method | 1/2 | 1/4 | 1/2 | 1/4 |
Pixel density(Unit:pixels/㎡) | 10000 | 10000 | 10000 | 10000 |
Module Total Resolution(L×H)(unit: pixel) | 32×16 | 32×16 | 32×16 | 32×16 |
Module Total Dimension(L×H)(unit: mm) | 320×160 | 320×160 | 320×160 | 320×160 |
Module Total Dimension(Unit:㎡) | 0.0512 | 0.0512 | 0.0512 | 0.0512 |
Cabinet Total Dimension(L×H)(unit: mm) | 960×960 | 960×960 | 640×640 | 640×640 |
Cabinet Total Dimension(Unit:㎡) | 0.9216 | 0.9216 | 0.4096 | 0.4096 |
Cabinet Total Resolution(L×H)(unit: pixel) | 96×96 | 96×96 | 64×64 | 64×64 |
Color Processing Level(unit:bit) | 16bit | 16bit | 16bit | 16bit |
Fresh frequency(hz) | 4800 | 4800 | 4800 | 4800 |
Brightness:nits | 9500 | 7000 | 9500 | 7000 |
Module Weight(unit:KG/module) | 0.640 | 0.563 | 0.640 | 0.563 |
Module Maximum Power Consumption(unit:W/module) | 35.8 | 25.6 | 35.8 | 25.6 |
Module Maximum Current(unit:A/module) | 7.2 | 5.1 | 7.2 | 5.1 |
Cabinet Weight(unit:KG/Cabinet ) | 25.8 | 25.8 | 11.5 | 11.5 |
In order to ensure our LED display product quality, durability and performance, ERALED established the most comprehensive testing systems done in the lab continue to provide much needed data to our engineers. We test ERALED products more rigorously than any other manufacturer. In fact, some of our lab test equipment is similar to that used by the automobile and aerospace industries.
ERALED outdoor LED display has passed StormTest, the most rigorous test in LED display industry
Environmental Simulator
Before product release, ERALED puts products through a variety of stress tests. Our lab technicians place entire video boards through a massive 4,500 cubic foot environmental chamber (Solar Thermal Simulation Area: 22' L x 11' H), in order to simulate extreme climate conditions, such as:
•Blistering Heat (74° C, 165° F)
•Freezing Cold (-34° C, -29° F)
•Humidity (15% to 90% RH)
Temperature/Humidity Chamber
The Temperature/Humidity Chamber simulates worse-case environments to test component sensitivity towards humidity, corrosion and electrical property changes. This assures that product components are as tough as their displays, by undergoing:
•Chamber Transitions (5° C/min, 9° F/min)
•Humidity Testing (10% RH to 98% RH)
Thermal Shock Chamber
This chamber ensures product durability by conducting unpowered thermal shock testing. In less than five seconds, products are transferred between hot and cold compartments.
Highly Accelerated Life Testing (HALT)
To determine product functioning limits, the HALT chamber combines environmental variables, such as temperature shock and vibration, to stress products to the point of failure.
Spray Test Chamber
To test how well enclosures protect components, this chamber drenches display parts with high-pressure water jets to assure performance against moisture.
Salt Fog Chamber
To gauge a component's capacity to withstand the corrosive effects of salty coastal air, this chamber punishes ERALED products with a 5% salt solution at a sweltering 35° C (95° F).
