Cabinet Monitoring Module(CMM)
Overview
Cabinet Monitoring Module(CMM), is the solution for cabinet level all-round monitoring display.
There is one CMM for each receiver card, so that every cabinet contains the functions of all-round monitoring, such as temperature, humidity, smoke, voltage, network data error rate and other parameters.
Cabinet Monitoring Module(CMM), contains two optional components, Monitor Expansion Board and LCD Panel. The Monitor Expansion Board is used for sensors inputs and related interface, the LCD Panel is used for displaying monitoring information .
At present, Cabinet Monitoring Module(CMM) support i5A and i5A-F.
Features
•Support cabinet level allover monitoring,
•Support for cabinet temperature, humidity, brightness, and smoke monitoring;
•Single card supports 4 relay control signal, which can be controlled by temperature and voltage automatically;
•Single card supports 4 voltage signal monitoring;
•Support LCD screen display monitoring information;
•Supports i5A, i5A-F two receiving card.
Hardware
1、Monitoring Expansion Board
1.1 Interface function
|
No. |
Name |
Function |
Remarks |
|
1 |
Smoke sensor |
Monitoring the smoke in the cabinet |
|
|
2 |
Humidity sensor |
Monitoring the smoke in the cabinet |
|
|
3 |
Voltage monitor |
Monitoring the voltage in the cabinet, such as the voltage of switch power supply |
Range：DV3-6V |
|
4 |
Temperature Sensor |
Monitoring the voltage in the cabinet |
|
|
5 |
Receiver connection port |
Connect to the J6 of i5A（or i5A-F）receiver card |
|
|
6 |
Relayoutputs |
4 relay control signal, which can control the power of alarm when the monitoring data is abnormal.（From bottom to top, followed by 1, 2, 3, 4) |
Can be set by software。 |
1.2 Definition of voltage monitor interface（J17）
2、LCD Panel
2.1 Interface function
|
No. |
Name |
Function |
Remarks |
|
|
1 |
Control |
Up |
Move up the selected item |
|
|
2 |
Down |
Move down the selected item |
||
|
3 |
Back |
Go back to previous menu. |
||
|
4 |
Menu / OK |
Enter menu or the selected item |
||
|
5 |
LCD |
Show the information of monitoring and setting |
Show content can be customized |
|
|
6 |
Receiver connection port |
Connect to port J9 of Receiver Card |
|
|
|
7 |
External interface |
Used for external buttons and indicator lights |
|
|
2.2 External interface pin definition
3、Connection diagram with receiver card
Note:
1. Port J6 of i5A (or i5A-F) receiver card connects to port J1 of the Monitoring Expansion Board;
2. Port J9 of i5A (or i5A-F) receiver card connects to port J1 of the LCD Panel.
