Model NO.: swimming pool equipment
Max Temperature: 43 Centigrade
Max Flow Rate: 4.32--56.50m3/H
Union Connection Provideduniversal Stand: Universal Standard
Way of Water Output: Top Mount
Transport Package: Carton
HS Code: 8421219090
Max Operating Pressure: 36psi/2.5bar
Pressure Gauge: Air Ss304 Pressure Gauge
Suggested Size of Media: 0.5-1.2mm
*****Swimming Pool Equipment Factory
for sand filter, pump, spa, integrative pool filter,
start block, pool acessories, waterfall*****
Swimming Pool Equipment System, Including:
Swimming pool filter system---pool sand filter, integrative filter, commercial sand filter
Swimming pool circulation system ---pool pump , steel pump
Swimming pool water heater system -- pool heater, heater pump
Swimming pool light system -- LED underwater light, 100W underwater light, 300W underwater light
Swimming pool disinfect system -- pool controller with dosing pump, chlorine feeder, chlorine
Swimming pool cleaning system -- brush, leaf skimmer, leaf rake, pole, test kit, vacuum head, hose
Swimming fitting accessories -- wall inlet, wall skimmer, water return, main drain, grating...
Around pool product -- ladder, life gaurder chair, handle rail, life buoys..
Swimming pool macth system -- starting block, pool lane, lane reel..
Pool massage system -- impact spa accessories, wallfall, spa chair, spa bed..
Swimming pool equipment construction draw :
Welcome to study more swimming pool equipment system!P SERIES TOP MOUNT SAND FILTER
Bobbinwound fiberglass reinforced tank is still the most popular standard in the industry after all. With UV-resistant surface finish,
it is able to operate under prolong sunlight for years of reliability. "P" Series (P350-P1400) filters are equipped with a six-position, 1.5", 2", & 2.5" multiport valve and ABS laterals.
Suggested Installation: Domestic Inground and above ground pool / hot spa tub
· Max operating pressure 36 psi / 2.5 bar
· Max temperature of 43°C (109°F) FEATURES
· Universal standard of union connection provided
· Suggested size of media : 0.5-0.8mm
Installation had been made simple, the only tools needed is a screwdriver and pipe sealant for plastic.
Locate the Filter on hard, level surface, preferably in a dry, shaded, and well-ventilated area.
1/ Place the empty tank in position.
2/ Fill the tank with water to the level that covers the laterals about 1/3 of the tank is recommended. This will avoid damages to the laterals by the force of the sand when pouring into the filter.
|Filter Area(m2)||Valve Connections||Max Flow Rate||Sand(kg)|
|P350||0.09||11/2inch 50mm||72lpm 4.32 m3/h||20|
|P400||0.13||11/2inch 50mm||108lpm 6.48 m3/h||35|
|P450||0.16||11/2inch 50mm||135lpm 8.10 m3/h||45|
|P500||0.22||11/2inch 50mm||185lpm 11.10 m3/h||85|
|P650||0.32||11/2inch 50mm||260lpm 15.60 m3/h||145|
|P700||0.40||11/2inch 50mm||325lpm 19.50 m3/h||210|
|P700(B)||0.41||2.0inch 63mm||336lpm 20.16 m3/h||215|
|P800||0.50||2.0inch 63mm||415lpm 24.90 m3/h||355|
|P900||0.64||2.0inch 63mm||520lpm 31.20m3/h||470|
|P900(C)||0.64||2.5inch 75mm||533lpm 32.00 m3/h||470|
|P1000||0.79||2.0inch 63mm||650lpm 39.00m3/h||620|
|P1000(C)||0.79||2.5inch 75mm||658lpm 39.50m3/h||620|
|P1200||1.13||2.0inch 63mm||860lpm 51.6 m3/h||860|
|P1200(C)||1.13||2.5inch 75mm||941lpm 56.5 m3/h||860|